More than steel – for over 300 years

 

Precision in wire, bar, profile, sheet, and strip. Variety in rolling, drawing, annealing, grinding. Metallic semi-finished products for your individual application, worldwide.

 

company industries materials

Our materials

Comprehensive portfolio including materials such as titanium, stainless steel, steel for special requirements: heat-resistant, corrosion-resistant or wear-resistant steel, spring steel with high strength, tool steel such as high speed steel (HSS) etc.

In our range you will find widely used alloys such as Ti-6Al-4V as well as special grades, including high-temperature materials for the chemical industry.

Semi-finished parts for your application

Our semi-finished products start in the precision area.

Round material, profiles, tubes, sheets, strips, or plates

  • round steel from 0.7 mm to  400 mm diameter
  • round wire from 0.15 mm to 25 mm diameter
  • flat wire from 0.1 mm to 4 mm thickness
  • profiles from 0.02 mm² to 1500 mm² cross-section
  • sheets and plates from 0.3 mm to 155 mm thickness
  • steel strip and steel foil from 0.02 mm to 2.0 mm thickness

You can choose from a wide range of dimensions and a wide variety of surface finishes. The wide range of strengths, tight tolerances of our strip steel or steel bars, and the high ductility of our wires are the result of extensive experience in cold forming.

 

to top