Special industriesSpecial industries

Product forms at Zapp Medical Alloys

For every area of application

The product forms available are bars, wires, profiles, strips, plates and tubes.

The materials for implants and medical instruments: martensitic and austenitic qualities, Co base alloys and titanium/titanium alloys. This means we stock one of the widest assortments in the world for you at our Service Center.

Bars

Stäbe
Dimension range:0.039 - 3.937 inch
Qualities:drawn, peeled, ground, polished
Bar ends:chamfered, pointed, centered, cut to length
Conditions:annealed, strain-hardened, stress-relieved
Straightness:0.020 inch, down to 0.008 inch on request
Roughness:up to Ra < 0.3 Gm
Tolerance:ISO 286-2 in tolerances ISO h11 to ISO h05
Additional tests:integral crack detection technology, US inspection, identity check
Additional services:Bar marking

Fine wires and premium wires

Dimension range:0.004 – 0.906 inch
Qualities:polished, bright
Tolerances:ISO 286-2 in tolerances ISO h11 to ISO h05
Additional tests:(integral) crack detection technology
Delivery form:in coils and on spool
Additional services:from 0.004 – 0.059 inch, also straightened and cut to length (bar lengths: 0.236 – 118.110 inch)

Profiles

Profile
Dimension range:0.012 x 0.016 inch – 2.362 x 0.394 inch / 1.181 x 1.181 inch
Qualities: rolled, drawn
Surfaces:bright, e-polished
Form:square profile, hexagonal, octagonal and ½, ⅓ and ¼ tube
"near net shape"precision profile according to your drawing

Strips and sheets

Präzisionsbänder und Bleche
Thicknesses:from 0.001 – 0.134 inch
Widths:up to 41.969 inch
Sheets:0.020 – 3.937 inch
Conditions:cold worked, fully annealed, hardened
Additional services:water jet cut blanks

Panels / format plates

Tafeln / Formatplatten
Form:square profile or in round blanks
Additional services:water jet cuttings
Qualities:standard sizes available

Tubes

Rohre
Qualities:thin-walled, seamless, drawn, ground
Outer diameter:0.157 - 0.787 inch
Inner diameter:0.020 - 0.591 inch