Special industriesSpecial industries

Product forms at Zapp Medical Alloys

For every area of application

The product forms available are bars, wires, profiles, strips, plates and tubes.

The materials for implants and medical instruments: martensitic and austenitic qualities, Co base alloys and titanium/titanium alloys. This means we stock one of the widest assortments in the world for you at our Service Center.

Bars

Stäbe
Dimension range:1 - 100 mm
Qualities:drawn, peeled, ground, polished
Bar ends:chamfered, pointed, centered, cut to length
Conditions:annealed, strain-hardened, stress-relieved
Straightness:0.5 mm/m, down to 0.2 mm/m on request
Roughness:up to Ra < 0.3 Gm
Tolerance:ISO 286-2 in tolerances ISO h11 to ISO h05
Additional tests:integral crack detection technology, US inspection, identity check
Additional services:Bar marking

Fine wires and premium wires

Dimension range:0.1 – 23 mm
Qualities:polished, bright
Tolerances:ISO 286-2 in tolerances ISO h11 to ISO h05
Additional tests:(integral) crack detection technology
Delivery form:in coils and on spool
Additional services:from 0.1 – 1.5 mm, also straightened and cut to length (bar lengths: 6 – 3000 mm)

Profiles

Profile
Dimension range:0.3 x 0.4 mm – 60.0 x 10.0 mm / 30.0 x 30.0 mm
Qualities: rolled, drawn
Surfaces:bright, e-polished
Form:square profile, hexagonal, octagonal and ½, ⅓ and ¼ tube
"near net shape"precision profile according to your drawing

Strips and sheets

Präzisionsbänder und Bleche
Thicknesses:from 0.025 – 3.4 mm
Widths:up to 1066 mm
Sheets:0.5 – 100 mm
Conditions:cold worked, fully annealed, hardened
Additional services:water jet cut blanks

Panels / format plates

Tafeln / Formatplatten
Form:square profile or in round blanks
Additional services:water jet cuttings
Qualities:standard sizes available

Tubes

Rohre
Qualities:thin-walled, seamless, drawn, ground
Outer diameter:4 - 20 mm
Inner diameter:0.5 - 15 mm