Product forms at Zapp Medical Alloys
For every area of application
The product forms available are bars, wires, profiles, strips, plates and tubes.
The materials for implants and medical instruments: martensitic and austenitic qualities, Co base alloys and titanium/titanium alloys. This means we stock one of the widest assortments in the world for you at our Service Center.
To get an overview of our material portfolio, please find below our linecards of instrument and implant materials.
Linecard for Implant Materials
Linecard for Instrument Steel
Bars
Dimension range: | 1 - 100 mm |
Qualities: | drawn, peeled, ground, polished |
Bar ends: | chamfered, pointed, centered, cut to length |
Conditions: | annealed, strain-hardened, stress-relieved |
Straightness: | 0.5 mm/m, down to 0.2 mm/m on request |
Roughness: | up to Ra < 0.3 Gm |
Tolerance: | ISO 286-2 in tolerances ISO h11 to ISO h05 |
Additional tests: | integral crack detection technology, US inspection, identity check |
Additional services: | Bar marking |
Fine wires and premium wires
Dimension range: | 0.1 – 23 mm |
Qualities: | polished, bright |
Tolerances: | ISO 286-2 in tolerances ISO h11 to ISO h05 |
Additional tests: | (integral) crack detection technology |
Delivery form: | in coils and on spool |
Additional services: | from 0.1 – 1.5 mm, also straightened and cut to length (bar lengths: 6 – 3000 mm) |
Profiles
Dimension range: | 0.3 x 0.4 mm – 60.0 x 10.0 mm / 30.0 x 30.0 mm |
Qualities: | rolled, drawn |
Surfaces: | bright, e-polished |
Form: | square profile, hexagonal, octagonal and ½, ⅓ and ¼ tube |
"near net shape" | precision profile according to your drawing |
Strips and sheets
Thicknesses: | from 0.025 – 3.4 mm |
Widths: | up to 1066 mm |
Sheets: | 0.5 – 100 mm |
Conditions: | cold worked, fully annealed, hardened |
Additional services: | water jet cut blanks |
Panels / format plates
Form: | square profile or in round blanks |
Additional services: | water jet cuttings |
Qualities: | standard sizes available |
Tubes
Qualities: | thin-walled, seamless, drawn, ground |
Outer diameter: | 4 - 20 mm |
Inner diameter: | 0.5 - 15 mm |
© 2012 ZAPP AG